Acudor Equipment Access Roof Hatch Aluminum - Double Leaf

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are required. This opening allows for equipment to be installed or removed from a building through the roof.

RHA Features

Weather tight construction
Convenient one-hand operation
12" high insulated curb
Supports 40lbs./sq. ft. live load

RHA Optional Features

Painted and Anodized finishes
Galvanized steel curb and Aluminum cover
Polycarbonate domes for daylighting
Louvered Curbs
Curb Mounted Units
Curb pitch corrected for sloped roof
Higher curb heights for "green roof" applications

RHA Standard Sizes

	CURB ID L&W	WEIGHT PER HATCH
MODEL	inches (mm)	lbs. (kg.)
A6868	60 x 60 (1524 x 1524)	180 (82)

Specifications

Cover	Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 11 gauge aluminum with a 20 gauge aluminum inside liner.
Curb	1/8" thick aluminum with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge Pin	Heavy duty Aluminum pintle hinges with 3/8" pin
Opening	Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch	Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish	Mill finish.